Week in Space Data, every Friday.
This launch has flown
Liftoff
Counts are flown launches (successes, partial failures and failures) in the SpaceNexus launch record for the calendar year, up to and including this one. The outcome is Launch Library 2’s own label. Booster serials and reuse counts are not in our records; the provider publishes them.
No webcast was linked to Falcon 9 · Starlink Group 11-12 in the launch feed. The provider's own channel is the place to look for a replay.
Liftoff Oct 25, 2025, 14:20 UTC. Live chat ran from two hours before liftoff to two hours after.
Every entry is a change we recorded, not a forecast. Our sync checks Launch Library 2 every 15 minutes, so a time is when we saw the change and can trail the real moment. The liftoff time is the one the launch record states.
Liftoff
from the launch record
Outcome in the launch record: Success
time not in the recordfrom the launch record
Falcon 9 (SpaceX)
Falcon 9 is a two-stage rocket: nine Merlin engines on the first stage and one Merlin Vacuum engine on the second, all burning kerosene and liquid oxygen. The first stage is reusable and flies many times.
Source: SpaceX: Falcon 9, checked 2026-09-27The provider's page for this flight
A typical Falcon 9 flight, with typical times. Every mission differs, and this is a guide, not live tracking: nothing here is ticked off by the clock.
The launch vehicle is vertical on the pad. Ground crews perform final inspections, range safety checks, and verify all telemetry links. Weather balloons are launched to check upper-level winds.
RP-1 kerosene and liquid oxygen (LOX) are loaded into the first and second stages. LOX loading continues until just before launch due to boil-off. The strongback retracts to launch position.
Automated launch sequence begins. Flight computers take over countdown. Final range safety checks, propellant pressurization, and engine chill procedures are completed. Launch director polls all stations for GO.
Nine Merlin 1D engines ignite generating 1.7 million pounds of thrust. The vehicle is released from hold-down clamps at T+0 and begins its ascent. The vehicle clears the tower within seconds.
The vehicle passes through the region of maximum aerodynamic stress at approximately 35 kPa. Engines throttle down to ~70% to reduce structural loads, then throttle back up after passing through Max-Q.
All nine first-stage engines shut down after accelerating the vehicle to approximately 2.3 km/s. The first stage has burned through most of its propellant. Brief coast phase begins before stage separation.
Pneumatic pushers separate the first and second stages. Cold gas thrusters orient the first stage for its return journey. The interstage separates cleanly, allowing the second stage engine to ignite safely.
The single Merlin Vacuum engine ignites in the near-vacuum of space. Its extended nozzle is optimized for vacuum operation, producing 981 kN of thrust. This burn will place the payload into its target orbit.
The two halves of the payload fairing separate and fall away, exposing the payload to space. The fairing is no longer needed as the vehicle is above the sensible atmosphere. Fairings may be recovered by ships at sea.
The second stage engine shuts down after achieving the target orbital velocity of approximately 7.8 km/s. The payload is now in its target orbit at approximately 250 km altitude.
The payload separates from the second stage adapter. Springs or motorized mechanisms push the satellite away from the rocket. The satellite deploys solar panels and begins its own mission.
The first stage performs a series of burns: boostback burn to reverse trajectory, entry burn to slow down through the atmosphere, and a single-engine landing burn. Grid fins steer the booster to a precision landing on a drone ship or landing pad.
All primary mission objectives have been achieved. The payload is confirmed in its target orbit with healthy telemetry. The first stage has been recovered (if applicable). Mission success declared.
Checking for a discussion…